Civil Engineering - Irrigation - Discussion
Discussion Forum : Irrigation - Section 1 (Q.No. 19)
19.
In a Sarda type fall, the rectangular crest, may be used for discharge upto
Discussion:
8 comments Page 1 of 1.
Bharat Das said:
4 years ago
14 cumecs is for trapiezoidal. For rectangular it is 4 cumecs.
Amish Devgan said:
4 years ago
Right, thanks @JohnySins.
Johny Sins said:
4 years ago
The answer should be " 4 cumecs".
14 cumecs is for Trapezoidal crest.
14 cumecs is for Trapezoidal crest.
Vaghesh Rajgor said:
7 years ago
For a discharge 4m^3/s in Sarda type fall rectangular crest is used.
The trapezoidal crest is used for discharge over 14M^3/s.
The trapezoidal crest is used for discharge over 14M^3/s.
Kajal said:
8 years ago
Thanks @Akash.
AKASH said:
8 years ago
@Kajal.
Sarda Type Fall is a fall with a raised crest. Below the fall suitable device is provided for dissipating excess energy of falling water. This type of falls were constructed on the Sarda canal in Uttar Pradesh and hence the name. As the crest of the fall is raised silting of the upstream canal is possible.
Sarda Type Fall is a fall with a raised crest. Below the fall suitable device is provided for dissipating excess energy of falling water. This type of falls were constructed on the Sarda canal in Uttar Pradesh and hence the name. As the crest of the fall is raised silting of the upstream canal is possible.
KAJAL said:
9 years ago
What is the meaning of sarda type fall?
RAJESH KUMAR said:
1 decade ago
In SARDA type fall :
a) For rectangular crest, discharge should be less than or equal to 14 cumecs.
b) For trapezoidal crest, discharge should be more than 14 cumecs.
a) For rectangular crest, discharge should be less than or equal to 14 cumecs.
b) For trapezoidal crest, discharge should be more than 14 cumecs.
(3)
Post your comments here:
Quick links
Quantitative Aptitude
Verbal (English)
Reasoning
Programming
Interview
Placement Papers