Civil Engineering - Highway Engineering - Discussion

Discussion Forum : Highway Engineering - Section 6 (Q.No. 18)
18.
While calculating the overtaking sight distance, the height of the object above road surface, is assumed
Zero
50 cm
75 cm
100 cm
120 cm
Answer: Option
Explanation:
No answer description is available. Let's discuss.
Discussion:
10 comments Page 1 of 1.

Swagat said:   2 years ago
RC has suggested the height of the eye level of the driver as 1.2 m and the height of the object as 0.15 m above the road surface.

If overtaking sight or intermediate sight distance is considered, then the value of driver's eye height and the height of obstructions are taken equal as 1.2 meters.
(2)

Mohsan Chhajro said:   2 years ago
If overtaking sight or intermediate sight distance is considered, then the value of the driver’s eye height and the height of obstructions are taken equal as 1.2 meters.
(1)

Yasir gandapur said:   3 years ago
75cm is the correct answer.

Aaaa said:   5 years ago
For ssd, height above object - 0.15m.
height for eye -1.2m.
For both case of OSD - 1.2m.
(5)

Balli Singh said:   6 years ago
E is the correct answer.

OSD is the distance at which a driver whose line of sight is 1.2m above the highway surface can see the top of an object 1.2m above the highway.
(1)

Utsav said:   7 years ago
120 is height of drivers eye.

Nik said:   7 years ago
The object height is 0.15 m.
And OSD is 1.20 m.

Kshitiz said:   8 years ago
Answer is correct.

It's overtaking sight distance not safe sight distance.

Bhanuvalmiki said:   8 years ago
The answer is not 120 cm It's a 0.15m.
(2)

Jagdish said:   8 years ago
The height of the object above road surface is 15cm.
(1)

Post your comments here:

Your comments will be displayed after verification.