Civil Engineering - Concrete Technology - Discussion
Discussion Forum : Concrete Technology - Section 2 (Q.No. 6)
6.
1.S. Sieve Nos. 10 mm and 4.75 mm are geneally used for grading of
Discussion:
16 comments Page 2 of 2.
Blackskin Head said:
6 years ago
Greater than 4.75 mm - coarse and else fine.
Datum is 4.75. So both.
Datum is 4.75. So both.
Kasim Ali said:
5 years ago
Coarse aggregates is the right answer.
Cyclone aggregates more than 75mm.
Cyclone aggregates more than 75mm.
Ankit said:
5 years ago
0.075 - 4.75 mm Fine aggregate.
4.75 - 75 mm Coarse aggregate.
> 75 mm cyclone aggregate.
4.75 - 75 mm Coarse aggregate.
> 75 mm cyclone aggregate.
Aaqib farooq said:
5 years ago
The answer is correct because aggregate which is retained on 4.75mm sieve are called coarse aggregate and aggregate which passes through the 4.75mm sieve is called fine aggregate so the answer is correct.
Saurabh sharma said:
4 years ago
As per IS 383:2016 ...grading of aggregates.
Course agg:- 80mm 63mm 40mm 20mm 16mm 12.5mm 10mm 4.75mm 2.36mm.
Fine agg:- 10mm 4.75mm 2.36mm 1.18mm 600 micron 300 micron 150 micron.
For Fineness modulus:
Course aag:- 80mm 40mm 20mm 10mm 4.75mm 2.36mm 1.18mm 600mic 300mic 150mic.
Fine agg:- 4.75mm 2.36mm 1.18mm 600mic 300mic 150mic.
Course agg:- 80mm 63mm 40mm 20mm 16mm 12.5mm 10mm 4.75mm 2.36mm.
Fine agg:- 10mm 4.75mm 2.36mm 1.18mm 600 micron 300 micron 150 micron.
For Fineness modulus:
Course aag:- 80mm 40mm 20mm 10mm 4.75mm 2.36mm 1.18mm 600mic 300mic 150mic.
Fine agg:- 4.75mm 2.36mm 1.18mm 600mic 300mic 150mic.
(1)
Guru said:
2 years ago
Here, fine aggregates can also sieve along with course aggregates.
It is possible then sived with< 4.75 size sives.
It is possible then sived with< 4.75 size sives.
(2)
Post your comments here:
Quick links
Quantitative Aptitude
Verbal (English)
Reasoning
Programming
Interview
Placement Papers