Civil Engineering - Building Materials - Discussion
Discussion Forum : Building Materials - Section 1 (Q.No. 11)
11.
The initial setting time of lime-pozzolana, is
Discussion:
52 comments Page 5 of 6.
Ravi Mehta said:
1 decade ago
A pozzolan is an siliceous or siliceous and aluminous material which, in itself, possesses little or no cementitious value but which will, in finely divided form and in the presence of water, react chemically with calcium hydroxide at ordinary temperature to form compounds possessing cementitious properties.
Amit karn said:
1 decade ago
What is lime pozzolana cement and where is it used?
RIYA RICHU said:
1 decade ago
Initial setting time of OPC 30minutes final 10 hours.
Initial setting time of quick setting cement minutes.
Final setting time of quick setting cement is 30 minutes.
Initial setting time of high alumina cement is 3.5 hours.
Final setting time of high alumina cement is 5 hours.
Initial setting time of quick setting cement minutes.
Final setting time of quick setting cement is 30 minutes.
Initial setting time of high alumina cement is 3.5 hours.
Final setting time of high alumina cement is 5 hours.
Renuka patyal said:
1 decade ago
What is lime pozzolana cement?
Naresh said:
1 decade ago
But OPC cement initial setting time 30 min.
Sakthi said:
1 decade ago
Which type of construction site d LP40 Used?
Sandhya said:
1 decade ago
The activated lime pozzolana mixtures are rapid setting, the initial sets being obtained in 1-2 hr and the final within 24 hr.
Nourat mall said:
1 decade ago
Initial setting time is 2 hrs and final setting time is 24 hrs for LP40 lime pozzolana cement.
Karthick said:
1 decade ago
Clay materials will shrink in summer & swell in monsoon.
Chidhambar said:
1 decade ago
Initial setting time is up to 15 mins then, of final setting time is up to 6 hours.
Post your comments here:
Quick links
Quantitative Aptitude
Verbal (English)
Reasoning
Programming
Interview
Placement Papers