Civil Engineering - Building Materials - Discussion
Discussion Forum : Building Materials - Section 1 (Q.No. 11)
11.
The initial setting time of lime-pozzolana, is
Discussion:
52 comments Page 1 of 6.
Sen said:
3 years ago
The initial and final setting time of RHC is 5 mins and 30 mins respectively.
(4)
Satyam kumar said:
5 years ago
The initial setting time of lime pozzolana cement is 120 minutes.
(3)
Aakash said:
2 months ago
Type of Cement - Initial Setting Time:
Ordinary Portland Cement (OPC) - 30 minutes (min).
Rapid Hardening Cement (RHC) - 30 minutes (min).
Portland Pozzolana Cement (PPC) - 30 minutes (min).
Portland Slag Cement (PSC) - 30 minutes (min).
Low Heat Cement - 60 minutes (min).
Sulphate Resisting Cement - 30 minutes (min).
Quick Setting Cement - 5 minutes (min)** (sets very fast!)
High Alumina Cement - 30 minutes (min).
Lime-Pozzolana Cement - 90 minutes (min).
Ordinary Portland Cement (OPC) - 30 minutes (min).
Rapid Hardening Cement (RHC) - 30 minutes (min).
Portland Pozzolana Cement (PPC) - 30 minutes (min).
Portland Slag Cement (PSC) - 30 minutes (min).
Low Heat Cement - 60 minutes (min).
Sulphate Resisting Cement - 30 minutes (min).
Quick Setting Cement - 5 minutes (min)** (sets very fast!)
High Alumina Cement - 30 minutes (min).
Lime-Pozzolana Cement - 90 minutes (min).
(2)
Paras chy said:
5 years ago
What is the Final setting time of pozzolana cement?
(1)
Rupal said:
7 years ago
Why has the minimum initial setting time for opc been prescribed as 30 min?
(1)
Sam said:
7 years ago
I think it is 90 minutes.
(1)
M Abbas khan said:
6 years ago
The final setting of cement 10 hours and lime is 24 hours.
(1)
Nabin kumar Pandit said:
2 years ago
The initial setting time for lime pozzolana is Two hours.
(1)
Jatin said:
11 months ago
120 minutes is the right answer.
(1)
Manishika said:
10 months ago
It is found in Portland cement and the answer is 120 mins.
(1)
Post your comments here:
Quick links
Quantitative Aptitude
Verbal (English)
Reasoning
Programming
Interview
Placement Papers