Civil Engineering - Building Materials - Discussion
Discussion Forum : Building Materials - Section 1 (Q.No. 11)
11.
The initial setting time of lime-pozzolana, is
Discussion:
53 comments Page 2 of 6.
Krishna said:
10 years ago
Ordinary Portland Cement (OPC) is graded according to their strength. The grade indicates the compression strength (mpa) of the concrete that will attain after 28 days of setting.
Souhard bhati said:
8 years ago
Aluminum has a quick setting quality when mixed as raw material then how high alumina cement has more setting time as compared to opc, Even the aluminum amount is high.
Sandhya said:
1 decade ago
The activated lime pozzolana mixtures are rapid setting, the initial sets being obtained in 1-2 hr and the final within 24 hr.
Nourat mall said:
1 decade ago
Initial setting time is 2 hrs and final setting time is 24 hrs for LP40 lime pozzolana cement.
Chidhambar said:
1 decade ago
Initial setting time is up to 15 mins then, of final setting time is up to 6 hours.
Palani said:
1 decade ago
Why its takes to more initial setting ? Please explain me or what is the reason?
Sen said:
3 years ago
The initial and final setting time of RHC is 5 mins and 30 mins respectively.
(4)
Rupal said:
8 years ago
Why has the minimum initial setting time for opc been prescribed as 30 min?
(1)
SIKUN BISWAL said:
1 year ago
OPC's initial setting time is 30 MIN.
And final setting time is 600 MIN.
And final setting time is 600 MIN.
(1)
Satyam kumar said:
6 years ago
The initial setting time of lime pozzolana cement is 120 minutes.
(3)
Post your comments here:
Quick links
Quantitative Aptitude
Verbal (English)
Reasoning
Programming
Interview
Placement Papers