Civil Engineering - Building Materials - Discussion
Discussion Forum : Building Materials - Section 1 (Q.No. 43)
43.
Initial setting time of cement for asbestos cement products should be not less than
Discussion:
17 comments Page 1 of 2.
Malialpesh said:
5 years ago
Intensify the clinker grinding allowed supplementation does not impair the quality of the cement in an amount of not more than 0.5% by weight of cement. Initial setting time of cement should occur no earlier than 1.5 hours, and the end - no later than 10 hours from the start of mixing.
(1)
Kamran Iqbal said:
6 years ago
OPC:(Ordinary Portland cement)
Initial setting time = 30 min.
Final setting time = 10 hours.
LPC:(Lime pozzolana cement)
Initial setting time= 120 min (2 hours).
Final setting time = 6 hours.
High alumina cement:
Initial setting time= 3.5 hours.
Final setting time= 5 hours.
Initial setting time = 30 min.
Final setting time = 10 hours.
LPC:(Lime pozzolana cement)
Initial setting time= 120 min (2 hours).
Final setting time = 6 hours.
High alumina cement:
Initial setting time= 3.5 hours.
Final setting time= 5 hours.
(16)
Moustacheman said:
8 years ago
For Portland cement: Initial setting time=30 minutes n final setting time=10hours for LP40 initial=3hrs final=1day ie 24hrs For cement asbestos initial=1 and half hour ie 90 minutes.
Kishan datta said:
7 years ago
Portland Pozzolana cement and Asbestos cement have less C3A content as compare to Portland cement. So its setting time between 90 min to 120 min.
Gaurav singh said:
10 years ago
Initial setting time 120 min and final setting time 24 hour for lime pozzolan cement (asbestos cement).
Nasir khan said:
1 decade ago
I think initial setting time should not less than 30 min right and final setting time 10 hours.
Rampras said:
10 years ago
For lime pozzolana cement (Asbestos), the initial setting time shall not be less than 90 mins.
Mala said:
6 years ago
For asbestos cement, initial setting time is 90mins, for lime-pozzolana its 120 mins.
(4)
Avro said:
7 years ago
Then what is the final setting time of cement for asbestos cement products?
(3)
Munish said:
10 years ago
Please send initial and final setting times in various cement types.
Post your comments here:
Quick links
Quantitative Aptitude
Verbal (English)
Reasoning
Programming
Interview
Placement Papers