Civil Engineering - Building Materials - Discussion

Discussion Forum : Building Materials - Section 2 (Q.No. 2)
2.
A badly mixed cement concrete results in
segregation
bleeding
honey combing
none to these.
Answer: Option
Explanation:
No answer description is available. Let's discuss.
Discussion:
78 comments Page 8 of 8.

Amit said:   9 years ago
Hai, everyone. Please pay attention.

Segregation main cause when less binding material use and poorly graded coarse aggregates are use and water use in more quantity results separation of coarse particles.

Bleeding due to excess water and due to improper mixing. Concrete leads to honeycomb as. Pores are left. In concrete improper vibration. All leads to honeycombing.

Don't confuse. Thankyou.

MD Salahuddin said:   9 years ago
I agree that honey combing is the right answer.

Zeeshan said:   9 years ago
Segregation is caused by over mixing or by falling concrete from an unsuitable height.

So, honey combing is the right answer.

Vinoth said:   9 years ago
Honey combing is caused by improper consolidation the right answer is segregation.

Prajwal Deshmukh said:   9 years ago
Honey combing is the correct answer.

This is caused when the gravel, cement and water are not properly mixed together. When the water content is too little, and the concrete is poured into the structure, the mixture will not settle properly causing the water to drain from the top and settle on the bottom. This would result in the small holes appearing on the surface.

Afzal said:   9 years ago
Segregation is due badly mixing of concrete. Bleeding is over compaction of concrete via vibrator etc and honey combing is a result of Lean mixing of concrete of improper compaction while pouring the to congestion inside the concrete body.

Segregation is the right answer.

Santosh said:   9 years ago
Segregation is the correct answer.

Bamdev said:   9 years ago
Difference between segregation and bleeding?


Post your comments here:

Your comments will be displayed after verification.