Civil Engineering - Building Materials - Discussion
Discussion Forum : Building Materials - Section 2 (Q.No. 2)
2.
A badly mixed cement concrete results in
Discussion:
78 comments Page 2 of 8.
Ramani said:
8 years ago
Segregation occurs when less water cement ratios due to dry of concrete, bleeding occurs when high or excess W/C but honeycombing occurs only a bad mixing process happened so honeycombing is the correct answer.
Davara said:
6 years ago
Honeycombing is the term used to describe areas of the surface that are coarse and stony. It may be caused by insufficient fine material in the mix, perhaps due to incorrect aggregate grading or poor mixing.
Kaaleen Bhaiya said:
5 years ago
Honeycombing is the term used to describe areas of the surface that are coarse and stony. It may be caused by insufficient fine material in the mix, perhaps due to incorrect aggregate grading or poor mixing.
Pal said:
9 years ago
Honeycombing is the term used to describe areas of the surface that are coarse and stony. It may be caused by insufficient fine material in the mix, perhaps due to incorrect aggregate grading or poor mixing.
Nishant said:
8 years ago
In concrete, there are two types of segregation.
1. Course aggregates are separated from the concrete.
2. Groute (cement+paste) is separated from the concrete.
Honeycombing is the right answer.
1. Course aggregates are separated from the concrete.
2. Groute (cement+paste) is separated from the concrete.
Honeycombing is the right answer.
Rini sharma said:
8 years ago
When concrete is poured into the foundation forms it does not just flow in like water and fill up the forms to the top. If it is not vibrated properly it may leave voids called honeycombing.
Ahsan said:
4 years ago
Segregation occurs due to pouring from height and no compaction.
Bleeding happen due to excess water (increased W/C Ratio).
Honeycombing occurs due to improper compaction & W/C ratio.
Bleeding happen due to excess water (increased W/C Ratio).
Honeycombing occurs due to improper compaction & W/C ratio.
(6)
Bogz said:
1 decade ago
Honeycomb is a form of void and hollow in a body of concrete object. And these will be happen if there were some congestion of rebar's and insufficient vibration during concrete casting.
DeepAce said:
4 years ago
Segregation has happened during the pouring or placing of concrete from more than 1m height.
Bleeding is happened due to excessive water.
That's why honeycomb is the right answer.
Bleeding is happened due to excessive water.
That's why honeycomb is the right answer.
(2)
Sailo said:
10 months ago
Segregation should be the answer, if the mix and the proportion is bad, we will have segregation.
We mixed properly, but we are not compact properly, we will get Honey Combing.
We mixed properly, but we are not compact properly, we will get Honey Combing.
(2)
Post your comments here:
Quick links
Quantitative Aptitude
Verbal (English)
Reasoning
Programming
Interview
Placement Papers