Chemical Engineering - Petroleum Refinery Engineering - Discussion
Discussion Forum : Petroleum Refinery Engineering - Section 1 (Q.No. 20)
20.
Crude oil is pumped by a __________ pump.
Discussion:
14 comments Page 1 of 2.
Subhajit said:
4 years ago
Centrifugal pump is right answer because It's have high flow rate compared with positive displacement pump. For decrease the viscosity preheater are installed in pipe line.
(1)
Jeet said:
5 years ago
For high flow rate centrifugal pump is the right answer.
Sarath sfc said:
6 years ago
Centrifugal pump is correct answer.
It is a above ground drive for a submersible pump in a borehole. Used to raise crude oil from oil wells. Crude Oil generally has high viscosity, surface transfer pumps (centrifugal, plunger pumps, hydraulic pumps) they are always required to be geared or hydraulic to ensure positive displacement.
It is a above ground drive for a submersible pump in a borehole. Used to raise crude oil from oil wells. Crude Oil generally has high viscosity, surface transfer pumps (centrifugal, plunger pumps, hydraulic pumps) they are always required to be geared or hydraulic to ensure positive displacement.
(1)
Deepchand Ruhela said:
6 years ago
Positive displacement pumps is not given high flowrate so It cannot use.
Because process is high flow rate required. So, we can use centrifugal pumps.
Because process is high flow rate required. So, we can use centrifugal pumps.
Pranjal said:
6 years ago
It is never Screw pumps because the flow rate needed for CDU (crude distillation unit) is sufficiently high and screw pumps give a very low flow rate. Centrifugal pumps are suitable for high flow rates and moderate pressures hence they are used to pump crude. Also crude is not that highly viscous that centrifugal pumps will be unable to pump it.
(2)
Fajinas said:
7 years ago
It should be screw pump.
Sreeram said:
8 years ago
Screw pump is suitable for viscous oils.
APt said:
8 years ago
Crude oil pump or even the vacuum residue is pumped using a Centrifugal Pump. In refinery, 90% of pumps will be a centrifugal pump.
For Chemical injection purpose positive displacement pump is used.
For Chemical injection purpose positive displacement pump is used.
(1)
Rajesh said:
8 years ago
Centrifugal pump not suitable for heavy oils.
Prashant said:
8 years ago
For viscous oil, never use the centrifugal pump. Then how it is possible?
Post your comments here:
Quick links
Quantitative Aptitude
Verbal (English)
Reasoning
Programming
Interview
Placement Papers