Chemical Engineering - Fluid Mechanics - Discussion
Discussion Forum : Fluid Mechanics - Section 15 (Q.No. 19)
19.
Pick out the wrong statement:
Discussion:
5 comments Page 1 of 1.
Taisir said:
2 months ago
Blowers develop a maximum pressure of 2 atmospheres.
This is not accurate because:
Blowers typically operate between 1 to 2.5 atmospheres (gauge).
The upper limit can be more than 2 atmospheres, depending on the design and application.
For comparison:
Fans: up to ~1.1 atm.
Blowers: ~1.1 to 2.5 atm.
Compressors: > 2.5 atm.
So saying they have a "maximum" of 2 atmospheres is misleading — it's not an absolute cap.
This is not accurate because:
Blowers typically operate between 1 to 2.5 atmospheres (gauge).
The upper limit can be more than 2 atmospheres, depending on the design and application.
For comparison:
Fans: up to ~1.1 atm.
Blowers: ~1.1 to 2.5 atm.
Compressors: > 2.5 atm.
So saying they have a "maximum" of 2 atmospheres is misleading — it's not an absolute cap.
Ryker said:
11 months ago
Isn't option C correct statement?
Fitting friction losses (k) are converted into head using hL = Kv^2/2g.
Fitting friction losses (k) are converted into head using hL = Kv^2/2g.
Chayanika said:
2 years ago
You’re wrong @Lata.
The Boundary layer keeps on decreasing as it moves away from the leading age. Kinematic viscosity means laminar flow. So, the boundary layer thickness is more.
The Boundary layer keeps on decreasing as it moves away from the leading age. Kinematic viscosity means laminar flow. So, the boundary layer thickness is more.
Ramsajan Paswan said:
4 years ago
Due to friction, enegy losse take place not velocity head take place.
Lata said:
4 years ago
It should be option A.
Post your comments here:
Quick links
Quantitative Aptitude
Verbal (English)
Reasoning
Programming
Interview
Placement Papers