Chemical Engineering - Chemical Reaction Engineering - Discussion
Discussion Forum : Chemical Reaction Engineering - Section 6 (Q.No. 33)
33.
An irreversible aqueous phase reaction, A + B 
P, is carried out in an adiabatic mixed flow reactor. A feed containing 4kmole/m3 of each A and B enters the reactor at 8m3 /hr. If the temperature of the exit stream is never to exceed 390 K, what is the maximum inlet feed temperature allowed?
Data: Heat of reaction = - 50 kJ/mole
Density of the reacting mixture = 1000kg/m3
Specific heat of reacting mixture = 2kJ/kg.K
The above data can be assumed to be independent of temperature and composition.
P, is carried out in an adiabatic mixed flow reactor. A feed containing 4kmole/m3 of each A and B enters the reactor at 8m3 /hr. If the temperature of the exit stream is never to exceed 390 K, what is the maximum inlet feed temperature allowed?Data: Heat of reaction = - 50 kJ/mole
Density of the reacting mixture = 1000kg/m3
Specific heat of reacting mixture = 2kJ/kg.K
The above data can be assumed to be independent of temperature and composition.
Discussion:
3 comments Page 1 of 1.
Devender singh said:
8 years ago
Convert the specific heat in unit of k mol instead of kg. From conc divide by density which gives kmol per kg.
Then apply xa=(Cpr(t2-t1))/(-Hr).
T2 will come 290.
Then apply xa=(Cpr(t2-t1))/(-Hr).
T2 will come 290.
(1)
Potenz said:
4 years ago
Xa is 1, as we need maximum temperature, which can only be achieved if a is converted fully.
P.MARIAPPAN said:
6 years ago
How to get xa? Please explain it.
Post your comments here:
Quick links
Quantitative Aptitude
Verbal (English)
Reasoning
Programming
Interview
Placement Papers