Mechanical Engineering - Workshop Technology - Discussion
Discussion Forum : Workshop Technology - Section 2 (Q.No. 35)
35.
In a __________ , both cutting and non-cutting operations are performed at one station of the press in every stroke of the ram.
Discussion:
6 comments Page 1 of 1.
Nandy joseph said:
7 years ago
The answer is D. compound die.
1- Simple die- only one operation is performed for each strokes of the press ram.
2- Compound die-two or more cutting operation in one station in every strokes of the ram.
3- Combination die-two or more cutting operation in one station in the single strokes of the ram.
4- Progressive die-two or more cutting operation in a different station.
1- Simple die- only one operation is performed for each strokes of the press ram.
2- Compound die-two or more cutting operation in one station in every strokes of the ram.
3- Combination die-two or more cutting operation in one station in the single strokes of the ram.
4- Progressive die-two or more cutting operation in a different station.
Kukku said:
1 decade ago
More than one operation may be performed at one station. It is difficult from compound die in that in this die, a cutting operation is combined with a bending or drawing operation, due to that it is called combination die.
Gaurav said:
9 years ago
In compound die, only cutting operations are performed. Combination die is used for cutting as well as non-cutting operations. C is correct.
Sidharth Jain said:
1 decade ago
The answer should be compound die i.e option D.
Suryakant said:
9 years ago
I think Option d is right.
Vamsi said:
8 years ago
C is the correct option.
Post your comments here:
Quick links
Quantitative Aptitude
Verbal (English)
Reasoning
Programming
Interview
Placement Papers