Mechanical Engineering - Workshop Technology - Discussion
Discussion Forum : Workshop Technology - Section 2 (Q.No. 18)
18.
Gagger is used for cleaning the moulding sand.
Discussion:
11 comments Page 1 of 2.
Rajbir said:
6 years ago
A riddle is used for cleaning the moulding sand. It removes the unwanted material like metal scrap, iron and other metal parts, pebbles etc.
A gagger is used for reinforcing the moulding sand in the cope part of the moulding box. These are the iron rods or thick wires bent at one or both the ends. The bottom end of the gagger must be kept 5 to 8 mm away from the embedded pattern.
A gagger is used for reinforcing the moulding sand in the cope part of the moulding box. These are the iron rods or thick wires bent at one or both the ends. The bottom end of the gagger must be kept 5 to 8 mm away from the embedded pattern.
(3)
VIKRANT said:
1 decade ago
Chaplets are also called Gaggers. The vertical movement of cores due to buoyancy is usually arrested by supporting the cores using chaplets (or Gaggers).
(1)
Shariful DME said:
6 years ago
It is consist of L shape type tool. It is made an iron rod or thick wire. The main function of the gagger is hanging bodies of sand cope.
(1)
Sakib said:
7 years ago
It is used to support hanging mass of sand prevent it from breaking due to its own weight.
Shivashankar said:
6 years ago
L shaped metal accessory used in floor moulds to support hanging bodies of sand in cope.
SURYAA said:
6 years ago
Riddle are used to clean the moulding sand like impurities and foreign particles.
(2)
Deb said:
8 years ago
Gagger is L shaped tool used for supporting hanging parts during casting.
Shailesh said:
1 decade ago
It is used for reinforcement of sand and support hanging bodies.
Shasha said:
9 years ago
Please describe it in detail.
Dileep Maurya said:
8 years ago
Gagger is a reinforcement.
Post your comments here:
Quick links
Quantitative Aptitude
Verbal (English)
Reasoning
Programming
Interview
Placement Papers