Mechanical Engineering - Workshop Technology - Discussion
Discussion Forum : Workshop Technology - Section 6 (Q.No. 4)
4.
For smoothing and cleaning out depressions in the mould, a __________ is used.
Discussion:
5 comments Page 1 of 1.
Vijay Vyas said:
6 years ago
Great, thanks @Disha.
Disha said:
6 years ago
A slick is used for repair and finishing the mould surface after the removal of pattern. It is a double ended tool having a spoon on one end and a flat on the other end.
A lifter is used for picking up the unwanted dust and damaged parts of the mould. It is a L- shaped steel tool with long holding shank and a small toe. It is available in thin sections of various width and lengths, according to the shape of the mould.
A swab is used for moistening the sand around the edge before the pattern is withdrawn. It consists of soft hair brush to hold water at one end, and a rubber buld at the other end.
A gagger is used for reinforcing the moulding sand in the cope part of the moulding box. These are the iron rods or thick wires bent at one or both the ends. The bottom end of the gagger must be kept 5 to 8 mm away from the embedded pattern.
A lifter is used for picking up the unwanted dust and damaged parts of the mould. It is a L- shaped steel tool with long holding shank and a small toe. It is available in thin sections of various width and lengths, according to the shape of the mould.
A swab is used for moistening the sand around the edge before the pattern is withdrawn. It consists of soft hair brush to hold water at one end, and a rubber buld at the other end.
A gagger is used for reinforcing the moulding sand in the cope part of the moulding box. These are the iron rods or thick wires bent at one or both the ends. The bottom end of the gagger must be kept 5 to 8 mm away from the embedded pattern.
(1)
Prem said:
6 years ago
What is gagger? Please explain.
Tejasdeep Patil said:
7 years ago
The meaning of slick is smooth. As name suggests it is used for finishing the mould by making its surface smooth.
Duddu srinivas said:
7 years ago
What is meant by slick, swab, gagger? Anyone explain it.
Post your comments here:
Quick links
Quantitative Aptitude
Verbal (English)
Reasoning
Programming
Interview
Placement Papers