Mechanical Engineering - Strength of Materials - Discussion
Discussion Forum : Strength of Materials - Section 1 (Q.No. 7)
7.
A body is subjected to a tensile stress of 1200 MPa on one plane and another tensile stress of 600 MPa on a plane at right angles to the former. It is also subjected to a shear stress of 400 MPa on the same planes. The maximum normal stress will be
Discussion:
57 comments Page 2 of 6.
Arshad said:
1 decade ago
900+1/2(600*600+4*400*400)^1/2 = 1400.
Zaid said:
1 decade ago
Normal stress = (Fx+Fy)/2 + 1/2* ((Fx-Fy)^2 +4(txy)^2)).
Rahul prajapati said:
1 decade ago
@Amol and @Arshad this formula is used for max. Principal stress not for max normal stress.
SUJAY LONDHE said:
1 decade ago
Normal Stress = (Shear Stress*sin2theta)+((Fx+Fy)/2)+(((Fx-Fy)/2)cos2theata).
In this Case theta = 90 because they are at right angle.
Other all values are given on calculation we get ans A)400.
Reference: Strength of materials by R.K.Rajput.
Chapter 2, Page NO.95 Eq.2.8.
In this Case theta = 90 because they are at right angle.
Other all values are given on calculation we get ans A)400.
Reference: Strength of materials by R.K.Rajput.
Chapter 2, Page NO.95 Eq.2.8.
Rahul prajapati said:
1 decade ago
Normal stress and maximum stress difference tell me.
Sumit said:
1 decade ago
Principal Stress: Maximum and minimum normal stress possible for a specific point on a structural element.
Pradeesh said:
1 decade ago
Principal stresses are the stresses in the planes, where shear stress is equal to zero! so the principal stresses are essentially maximum and minimum normal stresses, with an angle of 90 degrees between them!
Vaibhav said:
1 decade ago
Max normal stress = Principle stress.
Saravanakumar said:
1 decade ago
Normal stress are the average stress in X and Y direction.
At particular plane that means angle of rotation the Normal stress will be maximum that plane/stress is called principle plane/stress.
At particular plane that means angle of rotation the Normal stress will be maximum that plane/stress is called principle plane/stress.
Suresh said:
1 decade ago
The maximum stress = x+y-z.
= 1400+600-200.
= 1400+600-200.
Post your comments here:
Quick links
Quantitative Aptitude
Verbal (English)
Reasoning
Programming
Interview
Placement Papers