Mechanical Engineering - Production Engineering - Discussion
Discussion Forum : Production Engineering - Section 1 (Q.No. 26)
26.
A fixture does not guide the tool.
Discussion:
16 comments Page 2 of 2.
Rabindar kumar(rk) said:
9 years ago
Jig are used for holding the work & guiding the tool.
Fixture is used only for holding the work.
Fixture is used only for holding the work.
Mayank said:
8 years ago
The main purpose of a fixture is to locate and in some cases hold a workpiece during either a machining operation or some other industrial process.
A jig differs from a fixture in that it guides the tool to its correct position in addition to locating and supporting the workpiece.
A jig differs from a fixture in that it guides the tool to its correct position in addition to locating and supporting the workpiece.
Rahul gupta said:
8 years ago
Use of jig for holding and supporting or guide.
Use of fixture only for holding.
Use of fixture only for holding.
Abhi said:
7 years ago
Jig is used to guide the wp and fixture is used to hold the wp.
Praveen said:
7 years ago
Fixture supports the work piece where as the jig guides the tool.
(2)
Suresh said:
7 years ago
The fixture holds the work in fixed location whereas jig holding the work and guiding the tool.
(1)
Post your comments here:
Quick links
Quantitative Aptitude
Verbal (English)
Reasoning
Programming
Interview
Placement Papers