Mechanical Engineering - Production Engineering - Discussion
Discussion Forum : Production Engineering - Section 5 (Q.No. 29)
29.
The process of changing the shape of grinding wheel as it becomes worn due to breaking away of the abrasive and bond, is called
Discussion:
9 comments Page 1 of 1.
Ganeshr said:
4 years ago
Right @Naga.
@Niharika. It is not turning it is truing.
Your explanation is correct but not suitable for the answer.
Truing is done at the time of mounting of wheel & dressing is done to remove worn-out grains from the face of the wheel.
@Niharika. It is not turning it is truing.
Your explanation is correct but not suitable for the answer.
Truing is done at the time of mounting of wheel & dressing is done to remove worn-out grains from the face of the wheel.
Niharika sathpathy said:
5 years ago
Turning is the right answer. Turning refresh to the shaping of the wheel to make run concentric run with the axis when a new grinding wheel mounting it must be true before use to remove the runout.
Naga said:
8 years ago
Dressing is related to removing worn out grains from the face of wheel.
Truing is related to give true geometric shape if it's worn out from original shape.
Truing is related to give true geometric shape if it's worn out from original shape.
Ashutosh said:
8 years ago
Turing: Regarding change form or shape of a wheel. i.e. to regain shape.
Dressing: To regain the dimensions of the wheel.
Dressing: To regain the dimensions of the wheel.
Abhay said:
9 years ago
It should be dressing, not truing. Truing is done when a grinder wheel is mounted.
Yugantar said:
9 years ago
The process of improving cutting edge of the grinding wheels is called as truing.
Ajaypal said:
9 years ago
It should be Dressing. How it's truing?
Harsh dixit said:
9 years ago
I agree that the answer is truing.
Siddharth said:
8 years ago
It is Dressing.
Post your comments here:
Quick links
Quantitative Aptitude
Verbal (English)
Reasoning
Programming
Interview
Placement Papers