Mechanical Engineering - Heat Transfer, Refrigeration and Air Conditioning - Discussion
Discussion Forum : Heat Transfer, Refrigeration and Air Conditioning - Section 1 (Q.No. 8)
8.
The by-pass factor for a cooling coil
Discussion:
19 comments Page 1 of 2.
Bhupendra singh said:
5 years ago
By pass factor is the percentage of air travels through a coil without touching it so as velocity increases it do not have more time to be in contact with coil surface so percentage of air that is not in contact with coil surface increases means bypass factor increases.
(1)
Divyank singh said:
8 years ago
According to nptel lecture 34 of rac. It has been said that as increasing velocity will reduce the time of contact so BPF decrease.
(1)
Golu said:
9 years ago
What is meaning of 'by pass air'?
Shiva said:
5 months ago
The bypass factor (BPF) is the fraction of air that bypasses the cooling coil without being cooled, indicating the coil's efficiency.
A lower BPF means better coil performance.
A lower BPF means better coil performance.
Shrivardhan said:
6 years ago
In both cases, cooling and heating the Bypass Factor will increase.
Harinder Singh said:
7 years ago
For the cooling coil, option A is correct.
For the heating coil, option B is correct.
For the heating coil, option B is correct.
Selvaraj said:
8 years ago
Anybody explain briefly about bypass factor.
Ysm said:
8 years ago
The inefficiency of heating coil or cooling coil in not being able to heat or cool the incoming air to the temp of cooling coil. For proper design, bypass factor should be less.
Ysm said:
8 years ago
What is the significance of by-pass factor?
Rajesh said:
8 years ago
Answer is correct.
Post your comments here:
Quick links
Quantitative Aptitude
Verbal (English)
Reasoning
Programming
Interview
Placement Papers