Mechanical Engineering - Heat Transfer, Refrigeration and Air Conditioning - Discussion

Discussion Forum : Heat Transfer, Refrigeration and Air Conditioning - Section 1 (Q.No. 6)
6.
The humidity ratio or specific humidity is the mass of water vapour present in
1 m3 of wet air
1 m3 of dry air
1 kg of wet air
1 kg of dry air
Answer: Option
Explanation:
No answer description is available. Let's discuss.
Discussion:
14 comments Page 1 of 2.

Rajesh said:   1 decade ago
Specific humidity is the proportion of the mass of water vapor per unit mass of the moist air sample (dry air plus the water vapor) it is closely related to humidity ratio and always lower in value.

Dayanand said:   1 decade ago
C right because water vapour weight in kg/wet air (dry air+water vapour) in kg.

Ali hassan said:   1 decade ago
D right because the Specific humidity is approximately equal to the "mixing ratio", which is defined as the ratio of the mass of water vapor in an air parcel to the mass of dry air for the same parcel.

Krrish said:   10 years ago
It is not clear can any of you please elaborate it.

Sagar said:   10 years ago
My question is ' How water vapors can be present in dry air' as written in the question?

Amrit said:   9 years ago
I think humidity ratio is the ratio in the mixture of water vapour and dry air.

Humidity ratio is evaluated from moist air. Eg. If 3kg of dry air is mixed with 2 kg of water vapour then humidity ratio will be 2/3.

Puneet said:   9 years ago
Specific humidity, the mass of water vapour in a unit mass of moist air, usually expressed as grams of vapour per kilogram of air.

Puneet Sharma said:   9 years ago
How can we measure air in terms of 'kg' and how water vapour can be present in 'dry air'?

Thalif hussain said:   9 years ago
Please explain clearly.

M MASOOM RAZZAQI said:   9 years ago
Dry air means there is no water suspended particals in air but dry water vapor are preent. Therefore these dry vapors %age is called specific humidity ratio.


Post your comments here:

Your comments will be displayed after verification.