Electronics - Voltage and Current - Discussion

Discussion Forum : Voltage and Current - General Questions (Q.No. 4)
4.
A voltage will influence current only if the circuit is:
open
insulated
high resistance
closed
Answer: Option
Explanation:
No answer description is available. Let's discuss.
Discussion:
71 comments Page 5 of 8.

Anurag said:   1 decade ago
I agree with ruchi.

Imran said:   1 decade ago
v=ir, in open ckt i=0, then v also 0,

Ram said:   1 decade ago
Current will flow through minimum resistance path only. In a open circuit n/w resistance offered is very high so current will be zero.

Pawan waghade said:   1 decade ago
Open circuit=no flow current.

If voltage sourse is present & curcuit is open then current will not flow.

Mathivathani said:   1 decade ago
Voltage is nothing but it is pressure. Pressure is only exist in closed circuit and so it influence electron and produce current.

Karthikeyan said:   1 decade ago
To flow the current the electron-hole pairs should be recombined that is done when only the circuit is closed.

Vineeta verma said:   1 decade ago
Open ckt no current flow.

Closed ckt current will be flow.

Shankar said:   1 decade ago
Electron and hole only recombine if circuit are closed, this condition important for flow current.

Swapnil said:   1 decade ago
From Ohm's law,
Current(I)=Voltage(V)/Resistance(R)

So, current is inversely proportional to resistance. Lower the resistence & the current will increase, if voltage is constant. This can happen only in case D.

Uma maheswararao said:   1 decade ago
Current flows in closed circuits only. At open terminals voltage is infinity that is maximum, where as current will be zero. In case short circuits, voltage is zero and current will be maximum.

So, voltage is inlfuence the current in closed circuits only.


Post your comments here:

Your comments will be displayed after verification.