Electronics - RLC Circuits and Resonance - Discussion
Discussion Forum : RLC Circuits and Resonance - Filling the Blanks (Q.No. 4)
4.
The output voltage is _____ at the resonant frequency in the given circuit.
Discussion:
16 comments Page 1 of 2.
Naresh said:
1 decade ago
Can anyone explain me this?
Natasha said:
1 decade ago
AT RESONANCE X = 0 & Z = R 380*(7/(7+33)) = 66.5
HIMS said:
1 decade ago
At resonance XL=XC.
Now Output Voltage can be obtained by applying voltage divider rule.
Vout= (7/(7+33))*380mV = 66.5mV.
Now Output Voltage can be obtained by applying voltage divider rule.
Vout= (7/(7+33))*380mV = 66.5mV.
Hashim said:
1 decade ago
What does Rw mean here. Is it resistance of wire or what?
Sharmi said:
1 decade ago
I think resistance of the windings of the inductance.
ARVINTH said:
1 decade ago
Why we use 360?
Sengar said:
1 decade ago
Here is Rw is the resistance of inductor or resistance it self?
Deepanshi said:
1 decade ago
Here Rw is internal resistance of inductor winding.
Punitha said:
1 decade ago
Ya if inductor is connected then the resistor is connected in series. That only shown there.
APARNA ANIL SURYAVANASHI said:
1 decade ago
Why you have not taken capacitive reactance?
Post your comments here:
Quick links
Quantitative Aptitude
Verbal (English)
Reasoning
Programming
Interview
Placement Papers