Electronics and Communication Engineering - Satellite Communication - Discussion
Discussion Forum : Satellite Communication - Section 1 (Q.No. 40)
40.
In communication satellites, the up-link normally operates at a higher frequency than the down-link because it
Discussion:
5 comments Page 1 of 1.
Ammar said:
6 years ago
Obviously, the radius of the satellite is much smaller than the earth so use a narrow concentrated beam for uplink.
AvishkarG said:
8 years ago
At earth station uplink freq can be generated at high. But at satellite due to space problem and limited power downlink freq is kept low.
Rishi Ram Panth said:
8 years ago
Why uplink frequency is higher?
@Pankaj.
What is the relation of the frequency with a high powered amplifier?
@Sabin.
The uplink distance is similar with downlink distance. So, what is the purpose of high uplink frequency?
@Pankaj.
What is the relation of the frequency with a high powered amplifier?
@Sabin.
The uplink distance is similar with downlink distance. So, what is the purpose of high uplink frequency?
Sabin said:
9 years ago
The distance between place is high and severe noise to get accurate signal.
Pankaj sharma said:
10 years ago
This happens because it is not possible for us to put high powered amp on satellite due to its space. That's why up link is always higher than down link,
Post your comments here:
Quick links
Quantitative Aptitude
Verbal (English)
Reasoning
Programming
Interview
Placement Papers