Electronics and Communication Engineering - Microwave Communication - Discussion

50. 

The electric field in a TWT due to applied signal

[A]. is directed along the helix axis
[B]. is directed radially from helix axis
[C]. is inclined to the helix axis by about 60°
[D]. is inclined to the helix axis by about 45°

Answer: Option A

Explanation:

In a klystron the resonant structure limits the bandwidth.

A TWT is a broadband device. Its main components are electron gun (to produce the electron beam) and a structure supporting the slow electromagnetic wave.

The velocity of wave propagation along the helix structure is less than velocity of light.

The beam and wave travel along the structure at the same speed.

Thus interaction occurs between beam and wave and the beam delivers energy to the RF wave.

Therefore the signal gets strengthened and amplified output is delivered at the other end of tube.

The main features of TWT are :

1. Frequency range - 0.5 GHz to 90 GHz

2. Power output - 5 mW at low frequencies(less than 20 GHz) 250 kW (continuous wave) at 3 GHz 10 MW (pulsed) at 3 GHz

3. Efficiency - about 5 to 20%

4. Noise - about 5 dB for low power TWT 25 dB for high power TWT

TWT is used as RF amplifier in broadband microwave receivers, repeater amplifier in broad band communication systems, communication satellites etc.


Post your comments here:

Name *:

Email   : (optional)

» Your comments will be displayed only after manual approval.