Computer Science - Computer Fundamentals - Discussion

Discussion Forum : Computer Fundamentals - Section 2 (Q.No. 3)
3.
Most important advantage of an IC is its
Easy replacement in case of circuit failure
Extremely high reliability
Reduced cost
Low power consumption
None of the above
Answer: Option
Explanation:
No answer description is available. Let's discuss.
Discussion:
10 comments Page 1 of 1.

Xoxo said:   1 decade ago
An integrated circuit or monolithic integrated circuit (also referred to as an IC, a chip, or a microchip) is a set of electronic circuits on one small plate ("chip") of semiconductor material, normally silicon. This can be made much smaller than a discrete circuit made from independent components. ICs can be made very compact, having up to several billion transistors and other electronic components in an area the size of a fingernail. The width of each conducting line in a circuit can be made smaller and smaller as the technology advances; in 2008 it dropped below 100 nanometers and in 2013 it was expected to be in the tens of nanometers.

ICs were made possible by experimental discoveries showing that semiconductor devices could perform the functions of vacuum tubes and by mid-20th-century technology advancements in semiconductor device fabrication. The integration of large numbers of tiny transistors into a small chip was an enormous improvement over the manual assembly of circuits using discrete electronic components. The integrated circuit's mass production capability, reliability, and building-block approach to circuit design ensured the rapid adoption of standardized integrated circuits in place of designs using discrete transistors.

There are two main advantages of ICs over discrete circuits: cost and performance. Cost is low because the chips, with all their components, are printed as a unit by photolithography rather than being constructed one transistor at a time. Furthermore, much less material is used to construct a packaged IC die than to construct a discrete circuit. Performance is high because the components switch quickly and consume little power (compared to their discrete counterparts) as a result of the small size and close proximity of the components. As of 2012, typical chip areas range from a few square millimeters to around 450 mm2, with up to 9 million transistors per mm2.

Integrated circuits are used in virtually all electronic equipment today and have revolutionized the world of electronics. Computers, mobile phones, and other digital home appliances are now inextricable parts of the structure of modern societies, made possible by the low cost of producing integrated circuits.

Nitin Kumar said:   1 decade ago
The function of an IC (integrated circuit) chip is to replace many separate electronic components which could possibly have been used to build a particular electronic circuit. Most of those separate components are replaced by just one tiny IC chip that has been manufactured ("fabricated" is the correct technical word) to include extremely miniature circuits which imitate the behavior of all those separate components.

N.C.Behera said:   8 years ago
IC is the combination of inductor, capacitor and resistors used in circuit for controlling electrical signals.

Sadaf said:   9 years ago
@Xoxo.

Thanks for such a detailed information.

Amirtha said:   7 years ago
Low power consumption is also an advantage.
(1)

Keshab said:   10 years ago
Tell me details about Integrated circuit.

Rehmat ali said:   1 decade ago
What is the function of IC ?

Shewangizaw Bogale said:   8 years ago
Well said, Thanks @Xoxo.

Anil Sahrma said:   1 decade ago
Integrated Circuit.

Twinkle pradhan said:   1 decade ago
What is ic?

Post your comments here:

Your comments will be displayed after verification.