Civil Engineering - Water Supply Engineering - Discussion
Discussion Forum : Water Supply Engineering - Section 3 (Q.No. 32)
32.
To detect the turbidity of the order of 0 to 1000 P.P.M. the instrument used is
Answer: Option
Explanation:
A nephelometer is a specific type of turbidimeter that is commonly used for the 0 to 1000 PPM range due to its sensitivity to scattered light.
Discussion:
21 comments Page 2 of 3.
Raju said:
6 years ago
Jackson Turbidimeter range more than 50ppm, but Baylis Turbidimeter is between 0-50ppm.
Vibha said:
6 years ago
Right, Thanks @Rahul.
Amu bokato said:
6 years ago
Please explain the answer clearly.
(2)
Pankaj said:
7 years ago
Jackson turbidimetet measures turbidity >25ppm.
Baylis turbidimetet measures 0-1000ppm.
Baylis turbidimetet measures 0-1000ppm.
Rahul said:
7 years ago
Jackson turbidimeter -> 25 - 1000 ppm.
Baylis turbidimeter measure very low turbidity -> 0 - 2 ppm.
Hellige turbidimeter -> 0- 50 mg/l.
Baylis turbidimeter measure very low turbidity -> 0 - 2 ppm.
Hellige turbidimeter -> 0- 50 mg/l.
SHANAL SHEKHAE said:
8 years ago
Turbidity is marked from 0-100. Jackson turbidimeter does not read turbidity less than 25 JTU.
Hemal said:
9 years ago
Turbidity > 50 PPM.
Used Jacksons Turbidimeter.
Used Jacksons Turbidimeter.
(1)
Sagar said:
9 years ago
Option B is the correct answer.
V S Rathod said:
9 years ago
Answer should be option B) Jackson turbidimeter.
Ganesh Rajgure said:
9 years ago
Baylis turbidimeter is used to measure turbiditt below 50 PPM THIS TURBIDIMETER measure low PPM.
Post your comments here:
Quick links
Quantitative Aptitude
Verbal (English)
Reasoning
Programming
Interview
Placement Papers