Civil Engineering - Water Supply Engineering - Discussion
Discussion Forum : Water Supply Engineering - Section 3 (Q.No. 32)
32.
To detect the turbidity of the order of 0 to 1000 P.P.M. the instrument used is
Answer: Option
Explanation:
A nephelometer is a specific type of turbidimeter that is commonly used for the 0 to 1000 PPM range due to its sensitivity to scattered light.
Discussion:
21 comments Page 1 of 3.
Junaid Roonjha said:
4 years ago
It is requested to the admin, if you upload any question then an explanation regarding that particular question should also be uploaded along with the question so that such confusion among the aspirants couldn't be developed.
(5)
Johny sins said:
2 years ago
Jackson Turbidimeter measures turbidity 25-1000 ppm.
Hellige Turbidimeter measures turbidity 0-50 ppm.
Baylis Turbidimeter measures turbidity 0-2 ppm.
As per my knowledge, Baylis turbidimeter cannot measure turbidity more than 2ppm and Hellige turbidimeter cannot measure turbidity more than 50ppm. And the question asked is upto 1000ppm.
Hellige Turbidimeter measures turbidity 0-50 ppm.
Baylis Turbidimeter measures turbidity 0-2 ppm.
As per my knowledge, Baylis turbidimeter cannot measure turbidity more than 2ppm and Hellige turbidimeter cannot measure turbidity more than 50ppm. And the question asked is upto 1000ppm.
(2)
Amu bokato said:
6 years ago
Please explain the answer clearly.
(2)
B.Singh said:
3 years ago
Jackson's Turbidimeter:
It is used to measure high turbidity, i.e. 25 " 1000 mg/l.
It cannot measure turbidity less than 25 mg/l.
Bayli's meter:
It is used to measure low turbidity, I. E less than 10 mg/l.
Ratio Turbidimeter:
When a turbidity meter is measuring with "ratio on' it will use data from several detectors and take an average, in order to correct for changes caused by this particle size difference.
Nephelometer.
This works on the principle of light scattering. It is a digital electronic device that measures low turbidity in water with very high precision in no time.
It measures turbidity in terms of NTU (Nephelometric Turbidity Unit).
It is used to measure high turbidity, i.e. 25 " 1000 mg/l.
It cannot measure turbidity less than 25 mg/l.
Bayli's meter:
It is used to measure low turbidity, I. E less than 10 mg/l.
Ratio Turbidimeter:
When a turbidity meter is measuring with "ratio on' it will use data from several detectors and take an average, in order to correct for changes caused by this particle size difference.
Nephelometer.
This works on the principle of light scattering. It is a digital electronic device that measures low turbidity in water with very high precision in no time.
It measures turbidity in terms of NTU (Nephelometric Turbidity Unit).
(1)
Hemal said:
9 years ago
Turbidity > 50 PPM.
Used Jacksons Turbidimeter.
Used Jacksons Turbidimeter.
(1)
Sanku said:
5 years ago
Jackson turbidimeter will be the answer.
(1)
Dipu said:
6 years ago
Jackson turbidimeter will be the answer.
(1)
Raju said:
6 years ago
Jackson Turbidimeter range more than 50ppm, but Baylis Turbidimeter is between 0-50ppm.
SHIBAM RAJ said:
2 years ago
The range should be 0-10 ppm, or 25-1000ppm.
Yash said:
3 years ago
Jackson turbidimeter is the right answer.
Post your comments here:
Quick links
Quantitative Aptitude
Verbal (English)
Reasoning
Programming
Interview
Placement Papers