Civil Engineering - UPSC Civil Service Exam Questions - Discussion
Discussion Forum : UPSC Civil Service Exam Questions - Section 22 (Q.No. 42)
42.
In the design of two-way slab restrained at all edges, torsional reinforcement required is :
Discussion:
2 comments Page 1 of 1.
Subhechhya ghosh said:
5 years ago
Area of torsional reinforcement = (3/4) *100% of area required for the maximum moment.
So, the answer is A.
So, the answer is A.
Sadashiva said:
7 years ago
The answer is A.
For restrained slab, the area of reinforcement in each of the four corner layers shall be three-quarters of the area required for the maximum mid span moment in the slab simply supported on both edges meeting at that corner. If the corner contained by edges over only one of which the slab is continuous, torsion reinforcement equal to 0.375 times the area of reinforcement provided the mid-span in the same direction shall be provided. If both edges are continuous, no torsion reinforcement shall be provided.
For restrained slab, the area of reinforcement in each of the four corner layers shall be three-quarters of the area required for the maximum mid span moment in the slab simply supported on both edges meeting at that corner. If the corner contained by edges over only one of which the slab is continuous, torsion reinforcement equal to 0.375 times the area of reinforcement provided the mid-span in the same direction shall be provided. If both edges are continuous, no torsion reinforcement shall be provided.
Post your comments here:
Quick links
Quantitative Aptitude
Verbal (English)
Reasoning
Programming
Interview
Placement Papers