Civil Engineering - Strength of Materials - Discussion
Discussion Forum : Strength of Materials - Section 1 (Q.No. 11)
11.
A uniform girder simply supported at its ends is subjected to a uniformly distributed load over its entire length and is propped at the centre so as to neutralise the deflection. The net B.M. at the centre will be
WL
Discussion:
37 comments Page 1 of 4.
Shweta said:
5 years ago
@Asif
By deflection of beams first find out value of middle prop reaction as:
(5wl^4)/384EI = (pl^3)/48EI.
p = 5wl/8.
After this B.M at the center is;
for UDL Wl^2/8 n for point load Pl/4.
therefore we have UDL minus point load.
Wl^2/8 - Pl/4.
Wl^2/8 - ((5/8) wl)/4 substitute value of P.
then we get WL/32.
By deflection of beams first find out value of middle prop reaction as:
(5wl^4)/384EI = (pl^3)/48EI.
p = 5wl/8.
After this B.M at the center is;
for UDL Wl^2/8 n for point load Pl/4.
therefore we have UDL minus point load.
Wl^2/8 - Pl/4.
Wl^2/8 - ((5/8) wl)/4 substitute value of P.
then we get WL/32.
(18)
Asif said:
1 decade ago
By deflection of beams first find out value of middle prop reaction as:
(5wl^4)/384EI = (pl^3)/48EI.
p = 5wl/8.
Then reaction at each end is 3wl/16.
Therefore BM at centre will be = (3wl/16)*(l/2)-(wl/2)*(l/4) is the answer wl/32.
(5wl^4)/384EI = (pl^3)/48EI.
p = 5wl/8.
Then reaction at each end is 3wl/16.
Therefore BM at centre will be = (3wl/16)*(l/2)-(wl/2)*(l/4) is the answer wl/32.
(3)
Palash said:
2 years ago
@Asif.
By solving the equation, we get wl^2/32.
By solving the equation, we get wl^2/32.
(2)
Kajal pukale said:
4 years ago
I think the answer is -wl^2/32.
(2)
Abidha said:
6 years ago
BM= wl2/8 for simply supported beams.
When l = l/2.
Then BM = wl2/32.
= Wl/32( where W=wl).
When l = l/2.
Then BM = wl2/32.
= Wl/32( where W=wl).
(2)
Shoukat battani said:
4 years ago
Thanks @Asif.
(1)
Ralph Puno said:
4 years ago
Thank you @Divya and @Sudip.
(1)
Usibha said:
6 years ago
Very well explained, Thanks @Asif.
Pritisha said:
1 decade ago
How to solve?
Ashish TM said:
3 years ago
Thanks.
Post your comments here:
Quick links
Quantitative Aptitude
Verbal (English)
Reasoning
Programming
Interview
Placement Papers