Civil Engineering - Steel Structure Design - Discussion
Discussion Forum : Steel Structure Design - Section 1 (Q.No. 37)
37.
A second horizontal stiffener is always placed at the neutral axis of the girder if the thickness of the web is less than
Discussion:
11 comments Page 1 of 2.
Nand ram singh Rana said:
9 years ago
I think, Both a and b option c correct.
It is not only c and b.
It is not only c and b.
Vikash said:
8 years ago
I think Both a & b options are correct!
Amrit raj negi said:
8 years ago
Horizontal stiffeners are required when the ratio of exceeds 200 i.e. d/t > 200.
* If the ratio is greater than 200 and less the 250 then provide horizontal stiffeners in addition to the vertical stiffener at a distance d/2.
* If d/t > 250 then required a second horizontal stiffener at the neutral axis of the girder.
Acc to this answer should be D. Neither (a) or (b).
* If the ratio is greater than 200 and less the 250 then provide horizontal stiffeners in addition to the vertical stiffener at a distance d/2.
* If d/t > 250 then required a second horizontal stiffener at the neutral axis of the girder.
Acc to this answer should be D. Neither (a) or (b).
Akhil said:
8 years ago
I think D is correct answer.
Azim uddin said:
8 years ago
I think it should be Neither A nor B.
Ritu said:
8 years ago
Answer is d/250.
Lungi nigidi said:
7 years ago
Answer is C. Here, they are asking web thickness is less than d/t >250 then additional horizontal stiffener is provided. It can also be written as d/250> t. It means if the thickness of the web is less than d/250. The second horizontal stiffener is provided.
Sunil said:
7 years ago
Option D is the correct answer.
Pramit Samanta said:
5 years ago
Answer is d/250 for structural steel.
Prakash bareth said:
4 years ago
D is the right answer.
The question is asking about 2nd horizontal stiffener, not 1st horizontal stiffener. It's range will 250 - 400.
So. Option D is right.
The question is asking about 2nd horizontal stiffener, not 1st horizontal stiffener. It's range will 250 - 400.
So. Option D is right.
Post your comments here:
Quick links
Quantitative Aptitude
Verbal (English)
Reasoning
Programming
Interview
Placement Papers