IndiaBIX

Civil Engineering - Steel Structure Design

Exercise : Steel Structure Design - Section 4
36.
The size of a butt weld is specified by the effective throat thickness which in the case of incomplete penetration, is taken as
of the thickness of thicker part
of the thickness of thicker part
of the thickness of thinner part
of the thickness of thinner part
none of these.
Answer: Option
Explanation:
No answer description is available. Let's discuss.
37.
The thickness of the web of a mild steel plate girder is less than d/200. If only one horizontal stiffener is used, it is placed at
the neutral axis of the section
2/3rd of the depth of the neutral axis from the compression flange
2/5th of the depth of the neutral axis from the compression flange
2/5th of the height of the neutral axis from tension flange
none of these.
Answer: Option
Explanation:
No answer description is available. Let's discuss.
38.
The load on a lintel is assumed as uniformly distributed if the height of the masonry above it, is upto a height of
the effective span
1.25 times the effective span
1.50 times the effective span
2.0 times the effective span
2.5 times the effective span.
Answer: Option
Explanation:
No answer description is available. Let's discuss.
39.
Working shear stress on the gross area of a rivet as recommended by Indian Standards, is
785 kg/cm2
1025 kg/cm2
2360 kg/cm2
none of these.
Answer: Option
Explanation:
No answer description is available. Let's discuss.
40.
Pick up the correct statement from the following:
Loaded columns are supported on column bases
Column bases transmit the column load to the concrete foundation
Column load is spread over a large area on concrete
In column bases, intensity of pressure on concrete block is assumed to be uniform
All the above.
Answer: Option
Explanation:
No answer description is available. Let's discuss.
Quick links
Quantitative Aptitude
Verbal (English)
Reasoning
Programming
Interview
Placement Papers