Civil Engineering - Soil Mechanics and Foundation Engineering - Discussion
Discussion Forum : Soil Mechanics and Foundation Engineering - Section 1 (Q.No. 3)
3.
The minimum water content at which the soil just begins to crumble when rolled into threads 3 mm in diameter, is known
Discussion:
26 comments Page 1 of 3.
Md A tiullah said:
1 decade ago
About 15g of dried soil passing through IS 425 micron is taken for plastic limit determination and is mixed with a sufficient amount of water which would enable to soil mass become plastic enough to be easily shape into a ball. When a diameter of 3 mm is reached, the soil is remolded into a ball.
The process of making the threat and remolded continuous till the threat at a dia. Of 3 mm, just start crumbling.
The process of making the threat and remolded continuous till the threat at a dia. Of 3 mm, just start crumbling.
Raghava said:
1 decade ago
As soon as water added to soil sample and thorough mixing the powdered form of soil mixes with water and forms a tight mass and remains as a plastic form. The limit of changing of plastic mass is known as plastic limit. It's completely known through practical doing instead of reading through books.
Jagadeesh said:
1 decade ago
It is the definition of plastic limit.
Mayank said:
8 years ago
It is shrinkage limit.
Ravi Kumar said:
8 years ago
Please give me the correct definition of Plastic limit.
Indhu said:
8 years ago
It is the limit at which soil stops behaving as a plastic material. It can be determined by plastic limit test or thread test.
Jagriti said:
8 years ago
At the beginning of crumbling it's plastic limit but after that it's shrinkage limit.
Pranjal said:
8 years ago
Crumbling means?
Shubham said:
7 years ago
Plastic or shrinkage limit.
ARYA ASHOKAN said:
7 years ago
It's shrinkage limit.
Post your comments here:
Quick links
Quantitative Aptitude
Verbal (English)
Reasoning
Programming
Interview
Placement Papers