Civil Engineering - RCC Structures Design - Discussion
Discussion Forum : RCC Structures Design - Section 1 (Q.No. 6)
6.
An R.C.C. column is treated as long if its slenderness ratio is greater than
Discussion:
94 comments Page 6 of 10.
Ankit said:
10 years ago
LNG column is l/b greater than 12 or l/r greater than 40.
Prashant said:
10 years ago
If slenderness ratio is lies between 12 - 60 then its short column. For greater than 60 it long or slender column.
Xavier said:
10 years ago
l/r = 50.
Ganesh said:
10 years ago
Long column (l/b) > 12.
or (l/r) > 40.
l = Effective length.
r = Radius of gyration.
b = Least dimension.
l/r is slenderness ration and it should be > 40. So 50 is the answer.
or (l/r) > 40.
l = Effective length.
r = Radius of gyration.
b = Least dimension.
l/r is slenderness ration and it should be > 40. So 50 is the answer.
Pankaj said:
10 years ago
It is not mentioned 50 anywhere but only greater than 12 is for long column, so 50 is not the exact option.
Amaran Radha said:
10 years ago
Please anyone explain clearly how come slenderness ratio of long column is 50?
Vishwanath Charantimath said:
10 years ago
Answer for the question is, long columns slenderness ratio is greater than 60 as per is 456 2000 page 42 clause 25.3.1.
Naren said:
10 years ago
Your is wrong. Long column can be said when slenderness ratio is > 12.
Lal kishor yadav said:
1 decade ago
Guys if Left/R min>40 then column is long. R min = Radius of gyration.
So option C is correct.
So option C is correct.
Lokeswara rao said:
9 years ago
If Leff/LLD >12 then it is a long column.
Post your comments here:
Quick links
Quantitative Aptitude
Verbal (English)
Reasoning
Programming
Interview
Placement Papers