Civil Engineering - RCC Structures Design - Discussion
Discussion Forum : RCC Structures Design - Section 4 (Q.No. 35)
35.
An R.C.C. column is treated as short column if its slenderness ratio is less than
Discussion:
9 comments Page 1 of 1.
Balvinder said:
6 years ago
Slenderness ratio 50 is for steel column not for RCC column.
For steel column:
Short <50.
Intermediate<50-200.
Long<>200.
For RCC column:
Short- less than or equal to 12.
Long - >12.
For timber column:
Short- less than or equal to 10.
Long- >10.
For steel column:
Short <50.
Intermediate<50-200.
Long<>200.
For RCC column:
Short- less than or equal to 12.
Long - >12.
For timber column:
Short- less than or equal to 10.
Long- >10.
(7)
Sagar Singh Bisht said:
6 years ago
According to IS 456-2000 if slenderness ratio is less than 40 then it is a short column.
Jeevan said:
7 years ago
For RCC column, it's 40.
(1)
Akshay said:
7 years ago
Ans is correct as per IS 456-1978.
As per IS 456-2000 it is less than 80.
As per IS 456-2000 it is less than 80.
Suman rai said:
8 years ago
Yes, D is the correct answer. I agree.
Shiva said:
8 years ago
Short steel column is one whose slenderness ratio does not exceed 50; an intermediate length steel column has a slenderness ratio ranging from about 50 to 200, and its behavior is dominated by the strength limit of the material, while a long steel column may be assumed to have a slenderness ratio greater than 200.
Muhammad Ali said:
8 years ago
I think 30 is the right answer.
Ram said:
10 years ago
As per Is:456 clause 25.3 answer is 60.
Abhishek said:
1 decade ago
If slenderness ratio<30, then its short column.
If its>30 but <120, then its medium column.
And if its >120, then its long column.
If its>30 but <120, then its medium column.
And if its >120, then its long column.
Post your comments here:
Quick links
Quantitative Aptitude
Verbal (English)
Reasoning
Programming
Interview
Placement Papers