Civil Engineering - RCC Structures Design - Discussion
Discussion Forum : RCC Structures Design - Section 1 (Q.No. 9)
9.
Pick up the correct statement from the following:
Discussion:
41 comments Page 1 of 5.
Praveen said:
1 decade ago
The answer should be A as the pile is used where we don't get hard strata just beneath the GL to bear the building load. So this pile is used to transfer the load to the deep hard rock strata to transfer the load of the structure.
Pathik Tank said:
1 decade ago
Actually the answer can be all of the above because there are end bearing piles, friction piles etc etc.
Rahul said:
1 decade ago
Yeah, all the answers are possible as there are different types of piles possible.
Sharvari said:
1 decade ago
Pile basically distributes the load to the surrounding soil in the ways described in option a and c.
That is it transfers the load through its lower end, which is known as end bearing Capacity and also through sides, which is termed as skin Friction. Hence the option C can be chosen which generalize both opt a and c that the load is transferred to soil.
That is it transfers the load through its lower end, which is known as end bearing Capacity and also through sides, which is termed as skin Friction. Hence the option C can be chosen which generalize both opt a and c that the load is transferred to soil.
Raj Rishi said:
1 decade ago
The pile transfers the load through skin friction and end cap and as it is driven in the soil it transfer the load to the soil surrounding it.
Syed said:
1 decade ago
Probability is all of above option it depends on the soil condition.
Shourie said:
1 decade ago
Question should be which is incorrect then the answer is B, as piles only transfer load through friction (surface area pie*dia*length) or through bearing (cross sectional area pie*dia^2*0.25).
Sagar Routh said:
1 decade ago
According to me all the answers are correct as there are different types of piles.
Bawankule said:
1 decade ago
Pile provided for improvement the bearing load due this the structure can not collapse.
Ayan sheet said:
1 decade ago
The answer should be all of the above.
Option A is end bearing pile.
Option C is friction pile.
Option B & C are the characteristic of pile.
Option A is end bearing pile.
Option C is friction pile.
Option B & C are the characteristic of pile.
Post your comments here:
Quick links
Quantitative Aptitude
Verbal (English)
Reasoning
Programming
Interview
Placement Papers