Civil Engineering - RCC Structures Design - Discussion
Discussion Forum : RCC Structures Design - Section 4 (Q.No. 42)
42.
For a ribbed slab
Discussion:
11 comments Page 1 of 2.
Yuvraj gupta said:
4 months ago
I think option C is the correct answer.
Binod mahto said:
2 years ago
According to 456 2000 4th amendment.
Spacing not greater than 1.5 mm.
Width not less than 65 mm.
Depth 50 to 80 mm.
Spacing not greater than 1.5 mm.
Width not less than 65 mm.
Depth 50 to 80 mm.
Shabaz said:
4 years ago
The width of rib, for a ribbed slab, should not be less than 75 mm.
Akash Das said:
6 years ago
@Santanujana and @Er.Suhail Bhat You both are 100% correct.
Er.Suhail Bhat said:
6 years ago
As per IS Code 456-2000:
Spacing bet rib should not be greater than 1.5m
Width shall not be less than 65mm.
Depth should be 4 times the width.
Spacing bet rib should not be greater than 1.5m
Width shall not be less than 65mm.
Depth should be 4 times the width.
(4)
Sharda said:
7 years ago
What is the correct answer? Please explain.
Santanujana said:
7 years ago
According to IS 456 cl no 30.5 spacing not greater than 1.5 m.
Width not less than 65 mm,
Depth not greater than 4 times of width.
Width not less than 65 mm,
Depth not greater than 4 times of width.
Sivabalan said:
7 years ago
I think C is the correct answer.
Uttam said:
7 years ago
@Arohi.
You are right. I agree.
You are right. I agree.
(1)
Arohi Rai said:
8 years ago
In RS Khurmi, the spacing is 1.5 m.
Anyone explain it, please.
Anyone explain it, please.
Post your comments here:
Quick links
Quantitative Aptitude
Verbal (English)
Reasoning
Programming
Interview
Placement Papers