Civil Engineering - RCC Structures Design - Discussion
Discussion Forum : RCC Structures Design - Section 2 (Q.No. 23)
23.
The width of the rib of a T-beam, is generally kept between
Discussion:
10 comments Page 1 of 1.
Jero M said:
3 years ago
In the T beam,
Width of the rib is taken between 1/3 to 2/3 of the rib depth.
And the depth is taken between 1/10 to 1/20 of the span.
Width of the rib is taken between 1/3 to 2/3 of the rib depth.
And the depth is taken between 1/10 to 1/20 of the span.
(2)
Viju said:
5 years ago
In T-beam.
Width/depth = 0.5 - 0.75.
Depth of flange/depth = 0.2.
Depth of web or rib/depth = 0.33 - 0.66.
Width/depth = 0.5 - 0.75.
Depth of flange/depth = 0.2.
Depth of web or rib/depth = 0.33 - 0.66.
(1)
Anshu said:
4 years ago
As per IS code, the correct answer is B.
(1)
Pakkirappa said:
8 years ago
This is actually 1/2 to 2/3 depth of the web.
Anurag said:
8 years ago
But, SSC ayog take this value (1/3 to 1/2).
A.K.GAUTAM said:
8 years ago
The Correct answer is D.
Ashish said:
7 years ago
As per my knowledge, Rib and web are the same thing.
Praveen said:
7 years ago
Yes, you are right @Ashish.
In case of t-beam web, rib and stem all of these are same.
In case of t-beam web, rib and stem all of these are same.
Deepak said:
7 years ago
Rib and web are not same rib is curtail on web or bar by which bar have to make more bond strength with concrete.
Adeel said:
5 years ago
It is one-third of the depth of rib.
Refference: Kurmi & Gupta.
Refference: Kurmi & Gupta.
Post your comments here:
Quick links
Quantitative Aptitude
Verbal (English)
Reasoning
Programming
Interview
Placement Papers