Civil Engineering - Building Materials - Discussion
Discussion Forum : Building Materials - Section 3 (Q.No. 17)
17.
Lime concrete is generally used for
Discussion:
18 comments Page 1 of 2.
Alpesh mali said:
3 years ago
Lime Concrete Uses in construction:
Lime concrete can be used for the construction of temporary structures or unimportant structures which are built for the ease of construction of permanent structures like tunnels, bridges, retaining walls, dams etc.
It has low thermal conductivity used for flooring at the ground level of old buildings.
Lime concrete mixed with an insulating material like lightweight clay or pumice is used for flooring purposes.
Masonry before the 20th century was done using lime concrete due to the elasticity of the lime mortar which allowed expansion or contraction of the walls without damaging masonry units.
It adjusts well when coming into contact of any surface due to its flexibility and hence forms a good bottom base and upper base construction for cement base.
The foundation base of load-bearing walls can be constructed using Lime concrete.
LIME CONCRETE CEILING:
LIME CONCRETE FLOORING.
The use of lime became obsolete over time due to its inconsistent quality, and long initial setting time but lime has been rediscovered to be a more environmentally sustainable binding material. The use of lime has been evolved over time and used for temporary constructions, insulation purposes, and underwater constructions to some extent when mixed with volcanic ash.
Lime concrete can be used for the construction of temporary structures or unimportant structures which are built for the ease of construction of permanent structures like tunnels, bridges, retaining walls, dams etc.
It has low thermal conductivity used for flooring at the ground level of old buildings.
Lime concrete mixed with an insulating material like lightweight clay or pumice is used for flooring purposes.
Masonry before the 20th century was done using lime concrete due to the elasticity of the lime mortar which allowed expansion or contraction of the walls without damaging masonry units.
It adjusts well when coming into contact of any surface due to its flexibility and hence forms a good bottom base and upper base construction for cement base.
The foundation base of load-bearing walls can be constructed using Lime concrete.
LIME CONCRETE CEILING:
LIME CONCRETE FLOORING.
The use of lime became obsolete over time due to its inconsistent quality, and long initial setting time but lime has been rediscovered to be a more environmentally sustainable binding material. The use of lime has been evolved over time and used for temporary constructions, insulation purposes, and underwater constructions to some extent when mixed with volcanic ash.
Engr.Taimoor Nasir said:
8 years ago
Lime concrete is generally used for foundations in dry-subgrade while.
For moist subgrade with high sub-soil water (usually 15 in Or less below the foundation level), cement concrete should always be used. In such situations the foundation concrete should not be leaner than 1:4:8 (1 cement 4 sand : 8 stone ballast).
The masonry work over the foundation lime concrete should be started only after 7 days.
In case of cement concrete, however, the masonry work over the foundation concrete may be started after 48 hours of its laying.
For moist subgrade with high sub-soil water (usually 15 in Or less below the foundation level), cement concrete should always be used. In such situations the foundation concrete should not be leaner than 1:4:8 (1 cement 4 sand : 8 stone ballast).
The masonry work over the foundation lime concrete should be started only after 7 days.
In case of cement concrete, however, the masonry work over the foundation concrete may be started after 48 hours of its laying.
Tdentaa said:
7 years ago
USES:
Lime in building industry is used for various purposes such as.
A matrix for lime concrete used in building foundations and filling where early setting is not required,
For preparing mortar for bedding bricks and stones in masonry works,
As a cementing material in plaster for covering walls and pointing in preserving joints, and.
For whitewashing and colour washing.
Lime in building industry is used for various purposes such as.
A matrix for lime concrete used in building foundations and filling where early setting is not required,
For preparing mortar for bedding bricks and stones in masonry works,
As a cementing material in plaster for covering walls and pointing in preserving joints, and.
For whitewashing and colour washing.
Goku said:
8 years ago
Lime concrete is very widely used for foundation bases of load bearing walls, columns, and under layers of floors. So, C is correct.
Rahul verma said:
3 years ago
Yes, option c is correct, lime concrete is used for foundation also.
Amit ami sharma said:
9 years ago
Lime concrete is used under floors over roofs etc.
Anand gopalan said:
8 years ago
Lime concrete is used for wall foundations also.
Giritharan said:
8 years ago
Option C is the correct answer. I also agree.
Garry said:
8 years ago
Option C is the correct answer for this.
Suman kumar said:
9 years ago
According to me, Option C is correct.
Post your comments here:
Quick links
Quantitative Aptitude
Verbal (English)
Reasoning
Programming
Interview
Placement Papers