Civil Engineering - Building Materials - Discussion
Discussion Forum : Building Materials - Section 5 (Q.No. 18)
18.
The weight of a good quality brick when immersed in water for a period of 16 hours should not exceed the weight of dry brick
Discussion:
11 comments Page 1 of 2.
Sachin said:
10 years ago
Not only 16 hrs also for 24 hrs when immersed in water should not cross 20%.
Makvana Disha said:
9 years ago
Why it is not crossed of 20% at or after 24 hrs?
Vikash prajapati said:
8 years ago
I think 15% is correct answer. 20% limit in 24 hr keep in water.
Roy said:
8 years ago
A brick is taken and it is weighed dry. It is then immersed in water for a period of 16 hours. It is weighed again and the difference in weight indicates the amount of water absorbed by the brick. It should not in exceed 20 percent of the weight of a dry brick.
Pradeep said:
8 years ago
As the time increase, water absorption will increase so for 16hrs it is less than 20% or may be 15%.
Garry said:
8 years ago
15% should be the correct answer.
Lucky said:
8 years ago
For 24 hr percentage, I'm increasing by weight is 25-35appro.
And so for 16 hours 20percentage.
And so for 16 hours 20percentage.
Sourav said:
6 years ago
I also think 15% is correct where 20% is for first-class brick.
Sanjay said:
6 years ago
In the case of Nepal it is 15%.
(1)
Krishna Kanta Samai said:
6 years ago
1st class brick in immersed 24 hours, water absorb is 20% but good quality brick is 15% absorbed in dry weight of a brick.
Post your comments here:
Quick links
Quantitative Aptitude
Verbal (English)
Reasoning
Programming
Interview
Placement Papers