Chemical Engineering - Process Control and Instrumentation
Exercise :: Process Control and Instrumentation - Section 3
1. |
The temperature range for which copper resistance thermometer can be used is __________ °C |
A. |
0 to 150 | B. |
-200 to 150 | C. |
350 to 750 | D. |
500 to 900 |
Answer: Option B
Explanation:
|
2. |
Paramagnetism method is not used for the composition determination of __________ in gases. |
A. |
oxygen | B. |
oxides of nitrogen | C. |
carbon dioxide | D. |
any of these |
Answer: Option C
Explanation:
|
3. |
An amplitude ratio of 0.1 corresponds to __________ decibels. |
Answer: Option B
Explanation:
|
4. |
For increased speed of response of an expansion pressure spring thermometer, the thermometer bulb should have a |
A. |
large area but small mass. | B. |
high thermal conductivity. | C. |
small specific heat. | D. |
all'a', 'b' & 'c'. |
Answer: Option D
Explanation:
|
5. |
Pressure of 0.0001 absolute psi can be measured by __________ gauge. |
A. |
Mcloid | B. |
Pirani | C. |
thermocouple | D. |
none of these |
Answer: Option A
Explanation:
|