Chemical Engineering - Fluid Mechanics - Discussion
Discussion Forum : Fluid Mechanics - Section 1 (Q.No. 38)
38.
For the transfer of solution of thick slurry, the pump used is a __________ pump.
Discussion:
13 comments Page 1 of 2.
Pritam said:
1 decade ago
The answer will be Diaphragm Pump.
Gear pump is for Viscous liquid with no suspended solids.
Diaphragm pump is for corrosive and slurry.
Centrifugal pump is inappropriate for viscous liquids.
Reciprocating pump is inappropriate for Slurry.
Gear pump is for Viscous liquid with no suspended solids.
Diaphragm pump is for corrosive and slurry.
Centrifugal pump is inappropriate for viscous liquids.
Reciprocating pump is inappropriate for Slurry.
(4)
Haripal said:
6 years ago
Gear pump is the right answer diaphragm pump is used for corrosive liquid like as a hidrochloric acid which is not a thick. So gear pump is the right answer.
KDJ said:
1 decade ago
It should be gear pump because gear breaks thickened slurry into acceptable pressure.
(1)
Ankit said:
6 years ago
The slurry is thick that is highly viscous so I think gear pump is the right answer.
Salikanti Kotesh said:
1 decade ago
Diaphragm = toxic liquids.
Centrifugal = corrosive and slurry (Ref : Mccbe Smith).
Centrifugal = corrosive and slurry (Ref : Mccbe Smith).
(1)
Omiiipagal said:
6 years ago
Geho pump is a reciprocative pump, it's used to transfer the digest Baxcite slurry.
Ramesh v said:
9 years ago
Diaphragm pump is usually used in the industry so diaphragm is right.
Rajesh said:
9 years ago
LSHS more viscosity fluid, so I think it's is a gear pump.
RAMESH VISHAWKARMA said:
8 years ago
Centrifugal pumps use me my industry for slurry.
(1)
Ashish said:
6 years ago
I think gear pump is the right answer.
(1)
Post your comments here:
Quick links
Quantitative Aptitude
Verbal (English)
Reasoning
Programming
Interview
Placement Papers