Placement Papers - Sony India
SONY INDIA PAPER - 17 AUG 2008
Posted by :
Mansi
(111)
Hi Friends
INSTRUMENTATION
1) PIN diode largest layer
2) Open loop transfer function of G(s)=3 (s+2)/s2(s+4)
3) He-Ne laser is a ________ level system
4) Guided mode, the normalized propagation lies between ________
5) Signal is periodic if and only if
6) A real valued signal X(n) is called symmetric if ________
7) Belt weighting system is a ________
8) Feed back relay it is a/an ________
9) Pressurization type another name ________
10) Software linearization is best for ________
11) Two –port network is reciprocal if and only if ________
12) Pipeline improve cpu performance in ________
13) Fast process likes flow control in ________
14) A machine cycle refer to ________
15) Illegal 8086 instruction ________
16) 8255 ic receive a rset signal ________
17) PSW reg. In 8085 microprocessor is ________
18) 8051 on chip RAM is ________
19) CMP instruction in 8085 microprocessor ________
20) Charge amplifier is used in ________
21) Quality factor parallel LR circuit___________
22) System has a single pole at origin its impulse response will be ________
23) Transfer function defined ________
24) Settling time of second outer system ________
25) Transfer function of 1000/(1+0.1s) (1+0.01s) ________
26) Question related to CRO and Transducers
INSTRUMENTATION
1) PIN diode largest layer
2) Open loop transfer function of G(s)=3 (s+2)/s2(s+4)
3) He-Ne laser is a ________ level system
4) Guided mode, the normalized propagation lies between ________
5) Signal is periodic if and only if
6) A real valued signal X(n) is called symmetric if ________
7) Belt weighting system is a ________
8) Feed back relay it is a/an ________
9) Pressurization type another name ________
10) Software linearization is best for ________
11) Two –port network is reciprocal if and only if ________
12) Pipeline improve cpu performance in ________
13) Fast process likes flow control in ________
14) A machine cycle refer to ________
15) Illegal 8086 instruction ________
16) 8255 ic receive a rset signal ________
17) PSW reg. In 8085 microprocessor is ________
18) 8051 on chip RAM is ________
19) CMP instruction in 8085 microprocessor ________
20) Charge amplifier is used in ________
21) Quality factor parallel LR circuit___________
22) System has a single pole at origin its impulse response will be ________
23) Transfer function defined ________
24) Settling time of second outer system ________
25) Transfer function of 1000/(1+0.1s) (1+0.01s) ________
26) Question related to CRO and Transducers
Quick links
Quantitative Aptitude
Verbal (English)
Reasoning
Programming
Interview
Placement Papers