Placement Papers - Mentor Graphics

Mentor Graphics Interview Experience - Bangalore, Jan 27, 2014
Posted by :
Ashwini S
(0)
Hi, I attended Mentor Graphics for Application Engineer with a 6.25 GPA for B.E. The Job role is to be a bridge between R&D and customers. They hired from EC/TC/EEE because this demands to know the whole technicality to answer questions posed by customers and to delight them.
It had.
1. Written round.
2. GD.
3. Case study.
4. Interview.
Written round had 5 sections with 45 questions and 60 minutes. This was quite easy. No sectional cutoff and no negative marking. Aptitude- 15 questions, digital- 10, C lang- 5, electrical- 5, descriptive- 5 where in first 4 sections was MCQ.
Aptitude:
1. When 3 inch equilateral triangle is cut into 3 on each side the no. of triangle formed with 1 inch is__.
Ans: 9.
2. If you trace the corner or the edge if the cube without repeating or taking your hand off then max no of edges traced.
Ans: 9.
3. No of 0's from 1-1000.
Ans: 192.
4. 3 ants at each corner of the triangle move randomly to another corner. What is the probability that they won't collide?
Ans: Favourable outcome-2, overall outcome-2*2*2. So 1/4.
1 problem on ages, 1 on combination, 2 on mixture and alligation, 1 on trains and then 1 on simplification. Digital was based on basics of the transistor, setup of a flip-flop, logic design and MOSFET.
1. NFET is more efficient than p FET because.
2. MOSFET in on state equivalent to.
A. Resistor B. Capacitor C. Inductor D. Battery.
3. Mosfet and capacitor is used in A. SRAM B. DRAM C. ROM D. DROM.
4. Delay in the cell depends on.
5. Setup of fipflop is.
6. Which one is not a universal gate?
A. 2-AND+2-OR B. 2-XOR C. 3-NAND D. 4:1 MUX.
7. Code in which only 1 bit change occurs?
Ans: Grey code.
C had post and pre-increment, static variables, and pointers.
Electrical had general questions.
1. Which has the least resistance?
A. 115v, 20w b. 115v, 12w c. 220v, 20w d. 220v, 12w.
2. How does the celing fan operate.
A. Split phase B. DC motor
3. DC series motor means.
4. Can we change the direction of DC motor?
Descriptive had 5 questions of 4-5 marks for each.
1. Draw CMOS NAND.
One on FSM, clock generator, GD topic was Should government hand over corruption to CBI. I could not clearly write round thinking that it might be difficult. So I didn't prepare well. Let the same thing not happen in your case. Prepare well.
All the Best. :).
It had.
1. Written round.
2. GD.
3. Case study.
4. Interview.
Written round had 5 sections with 45 questions and 60 minutes. This was quite easy. No sectional cutoff and no negative marking. Aptitude- 15 questions, digital- 10, C lang- 5, electrical- 5, descriptive- 5 where in first 4 sections was MCQ.
Aptitude:
1. When 3 inch equilateral triangle is cut into 3 on each side the no. of triangle formed with 1 inch is__.
Ans: 9.
2. If you trace the corner or the edge if the cube without repeating or taking your hand off then max no of edges traced.
Ans: 9.
3. No of 0's from 1-1000.
Ans: 192.
4. 3 ants at each corner of the triangle move randomly to another corner. What is the probability that they won't collide?
Ans: Favourable outcome-2, overall outcome-2*2*2. So 1/4.
1 problem on ages, 1 on combination, 2 on mixture and alligation, 1 on trains and then 1 on simplification. Digital was based on basics of the transistor, setup of a flip-flop, logic design and MOSFET.
1. NFET is more efficient than p FET because.
2. MOSFET in on state equivalent to.
A. Resistor B. Capacitor C. Inductor D. Battery.
3. Mosfet and capacitor is used in A. SRAM B. DRAM C. ROM D. DROM.
4. Delay in the cell depends on.
5. Setup of fipflop is.
6. Which one is not a universal gate?
A. 2-AND+2-OR B. 2-XOR C. 3-NAND D. 4:1 MUX.
7. Code in which only 1 bit change occurs?
Ans: Grey code.
C had post and pre-increment, static variables, and pointers.
Electrical had general questions.
1. Which has the least resistance?
A. 115v, 20w b. 115v, 12w c. 220v, 20w d. 220v, 12w.
2. How does the celing fan operate.
A. Split phase B. DC motor
3. DC series motor means.
4. Can we change the direction of DC motor?
Descriptive had 5 questions of 4-5 marks for each.
1. Draw CMOS NAND.
One on FSM, clock generator, GD topic was Should government hand over corruption to CBI. I could not clearly write round thinking that it might be difficult. So I didn't prepare well. Let the same thing not happen in your case. Prepare well.
All the Best. :).
Quick links
Quantitative Aptitude
Verbal (English)
Reasoning
Programming
Interview
Placement Papers