Mechanical Engineering - Strength of Materials - Discussion
Discussion Forum : Strength of Materials - Section 1 (Q.No. 2)
2.
A vertical column has two moments of inertia (i.e. Ixx and Iyy ). The column will tend to buckle in the direction of the
Discussion:
43 comments Page 5 of 5.
AAYUSH NARWAY said:
5 years ago
@All.
Consider a rectangular cross-section. Length along x and width along y(Length> Width). Draw you will see it will bend in the Y direction. Since it is thin that way. And moment of inertia in max in that direction.
Consider a rectangular cross-section. Length along x and width along y(Length> Width). Draw you will see it will bend in the Y direction. Since it is thin that way. And moment of inertia in max in that direction.
(1)
Saiteja said:
2 years ago
Moment of inertia is resists of angular acceleration, bending occurs only in min moment of inertia.
(6)
Praveen said:
1 year ago
Bending: Load applied perpendicular to the length of the bar, causing it to curve.
Buckling: Compressive load applied along the length of the bar, causing it to bend sideways when the load is critical.
Buckling: Compressive load applied along the length of the bar, causing it to bend sideways when the load is critical.
(5)
Post your comments here:
Quick links
Quantitative Aptitude
Verbal (English)
Reasoning
Programming
Interview
Placement Papers