Mechanical Engineering - Strength of Materials - Discussion
Discussion Forum : Strength of Materials - Section 1 (Q.No. 3)
3.
The neutral axis of the cross-section a beam is that axis at which the bending stress is
Discussion:
41 comments Page 4 of 5.
GUNTURU said:
1 decade ago
The bending stress is zero at that point distance is zero hence bending moment is not possible for equation MY/I=BENDING STRESS FOR THIS CASE Y=0 HENCE BENDING STRESS IS ZERO.
Amit said:
1 decade ago
M/I= Stress/distance from central plane (neutral axis).
Ram gupta said:
1 decade ago
Because the neutral axis pass through the CG of symmetrical section.
Rajneesh agrahri said:
1 decade ago
There is no effect which load acting at beam cross section.
Mukh ram meena said:
1 decade ago
At the neutral axis load zero, so BM will be zero.
Navin chandra said:
1 decade ago
Definition of the neutral axis itself says that "It is the axis on the plane of cross section, where strain, and hence stress is zero at the time of bending."
Shetty said:
1 decade ago
The force acting on beam it tends to bend the body but there no affect on the neutral axis so its zero.
Nagenendra singh said:
10 years ago
Because bending stress is proportional to distance between neutral point and outer fiber of beam. At neutral point its distance became zero so stress will be zero.
Ashish said:
10 years ago
Line or plane through a beam at which there is no extension or compression occurs when the beam bends.
KUNDAN said:
10 years ago
Applied load is crosses or on perpendicular to the neutral axis of beam. So BM is zero also the shear force is also zero.
Post your comments here:
Quick links
Quantitative Aptitude
Verbal (English)
Reasoning
Programming
Interview
Placement Papers