Mechanical Engineering - Production Engineering - Discussion
Discussion Forum : Production Engineering - Section 1 (Q.No. 41)
41.
The machining of titanium is difficult due to
Discussion:
33 comments Page 2 of 4.
Mln said:
8 years ago
Titanium alloys due to their high strength, low thermal conductivity and chemical reactivity with tool materials (at elevated temperatures), pose a hazard to the tool and significantly reduce the tool life.
Sk samsul huda said:
8 years ago
Titanium has high chemical reactivity.
Dhaval Chaudhary said:
7 years ago
C is the correct answer.
Ref:R.S. Kurmi.
Ref:R.S. Kurmi.
Anil Pradhan said:
9 years ago
Titanium alloys due to their high strength, low thermal conductivity and chemical reactivity with tool materials (at elevated temperatures), pose a hazard to the tool and significantly reduce the tool life.
Salahuddin said:
6 years ago
Both B and C can be the answer.
Ref : SK Mondal.
Ref : SK Mondal.
Vinay BEL said:
5 years ago
Option B is the right one.
Venkateshwar said:
1 day ago
Titanium is a low thermal-conductive material, so it is very difficult to disperse heat from the tool. Result of it tool worn easily.
Ritesh Singh said:
1 decade ago
Titanium is very reactive metal. So here option B should be correct.
Govardhan said:
9 years ago
Titanium can chemically bond with cutting tools, causing built up edges on the tool, decreasing the effectiveness of the tool. So option B is correct.
Neeraj said:
9 years ago
B is right answer according to Kalpakjian book.
Post your comments here:
Quick links
Quantitative Aptitude
Verbal (English)
Reasoning
Programming
Interview
Placement Papers