Electronics - Voltage and Current - Discussion
Discussion Forum : Voltage and Current - General Questions (Q.No. 4)
4.
A voltage will influence current only if the circuit is:
Discussion:
71 comments Page 2 of 8.
Mathivathani said:
1 decade ago
Voltage is nothing but it is pressure. Pressure is only exist in closed circuit and so it influence electron and produce current.
Pawan waghade said:
1 decade ago
Open circuit=no flow current.
If voltage sourse is present & curcuit is open then current will not flow.
If voltage sourse is present & curcuit is open then current will not flow.
Ram said:
1 decade ago
Current will flow through minimum resistance path only. In a open circuit n/w resistance offered is very high so current will be zero.
Imran said:
1 decade ago
v=ir, in open ckt i=0, then v also 0,
Anurag said:
1 decade ago
I agree with ruchi.
Rajesh said:
1 decade ago
We know that current always flows through low resistance path. During the open-circuit condition the circuit has high resisance.
Digvijay pandey said:
1 decade ago
Open circuit has infinite resistance and we know that resistance is opposition to flow of current if opposition to current is infinite then current is zero so we have ohms law
(i.e) v/i=r if i=o then v=o.
So circuit must be closed.
(i.e) v/i=r if i=o then v=o.
So circuit must be closed.
Mib said:
1 decade ago
Resistance is more if thre is an open path and current can't reach the desired destination so if it is cloesd then we can say the volt influence the current to move only if the circuit is closed.
Karthikeyan said:
1 decade ago
To flow the current the electron-hole pairs should be recombined that is done when only the circuit is closed.
Rajesh said:
1 decade ago
But what about in the transformers?
Post your comments here:
Quick links
Quantitative Aptitude
Verbal (English)
Reasoning
Programming
Interview
Placement Papers