Electronics - Series Circuits - Discussion
Discussion Forum : Series Circuits - General Questions (Q.No. 12)
12.
What is wrong, if anything, with this circuit?
Discussion:
13 comments Page 2 of 2.
Beeresha said:
8 years ago
v = 120,
r = 2k.
i = v/r so,120/2000=0.06,
R1 = shorted.
r = 2k.
i = v/r so,120/2000=0.06,
R1 = shorted.
Rio said:
6 years ago
When the resistors are in a series manner so it doesn't open it, if the resistor R1 is opened the circuit doesn't work, So the Answer is "The resistor R1 is Shorted".
Nahid Hasan said:
3 years ago
If there's no R1 and it is shorted, then the values are all correct.
Because the Voltage of R1 is exceed 120V, which is not possible of other values.
VR1= 0.116*2000= 232V, that's wrong.
Because the Voltage of R1 is exceed 120V, which is not possible of other values.
VR1= 0.116*2000= 232V, that's wrong.
(3)
Post your comments here:
Quick links
Quantitative Aptitude
Verbal (English)
Reasoning
Programming
Interview
Placement Papers