Electrical Engineering - Three-Phase Systems in Power Applications - Discussion
Discussion Forum : Three-Phase Systems in Power Applications - General Questions (Q.No. 1)
1.
In a three-phase system, the voltages are separated by
Discussion:
35 comments Page 2 of 4.
Aaron S Mulwanda said:
1 decade ago
The phase difference in 3 phase power system is the same. A complete circle has 360deg. Therefore, the voltages are separated by 120deg, 360/3=120.
Hemanth said:
1 decade ago
For the phase circuits other than 1 and 2. The phase angle can be calculated by using the formula "360/n".
Where "n" is the number of the phases.
In case of 2 - phase the angle is 90 degrees.
Where "n" is the number of the phases.
In case of 2 - phase the angle is 90 degrees.
Rajiv gandhi said:
1 decade ago
Each phase placed on 120 degree phase angle.
Jagadish said:
1 decade ago
In 3-phase s/m voltage are separate by 120.
NITHYASHRI said:
1 decade ago
ANGLE B-R = 120.
ANGLE R-Y = 120.
ANGLE R-B = 120.
TOTAL = 360.
ANGLE R-Y = 120.
ANGLE R-B = 120.
TOTAL = 360.
Mukesh kumar ghotra bemoth said:
9 years ago
In three phase system the phase sequence with angle 120°.
G.MOUNIKA said:
9 years ago
Nice answer with the clear explanation, Thank you all.
Karan Chakravarthi said:
6 years ago
Why 2 phase system 90 degrees.
Explain How?
Explain How?
Sethupathi said:
1 decade ago
In Three phase circuit angle between RYB phases are 120 degree.
Jinesh said:
1 decade ago
One rotation of the waveform is 360 deg. So to balance each phase are displaced at 120 deg.
Post your comments here:
Quick links
Quantitative Aptitude
Verbal (English)
Reasoning
Programming
Interview
Placement Papers