Digital Electronics - Digital Concepts - Discussion
Discussion Forum : Digital Concepts - General Questions (Q.No. 11)
11.
Parallel format means that:
Discussion:
22 comments Page 2 of 3.
Ronak said:
1 decade ago
Every signal have need particular line (conductor) to transmit data.
Teja said:
1 decade ago
Is serial format not a digital signal?, we need to give digital data as i/p to parallel format.
Krishnaveni said:
1 decade ago
It means conductor may be wired. In parallel transmission each data have own conductors.
Hiren said:
1 decade ago
In serial format only one bit (digital signal) is transmitted at a time by means of single wire. Whereas in parallel format Group of bits is transmitted at a time by means of BUS (group of wires).
Hence each digital signal has its own conductor in parallel format.
Hence each digital signal has its own conductor in parallel format.
(1)
Prakash said:
1 decade ago
----------------------
The above is a single wire through which bits can be transmitted serially i.e., one bit at a time.
----------------------0000
----------------------1101
----------------------1010
----------------------0001
The above are four parallel lines through which hexadecimal number can be transmitted simultaneously. It saves time.
The above is a single wire through which bits can be transmitted serially i.e., one bit at a time.
----------------------0000
----------------------1101
----------------------1010
----------------------0001
The above are four parallel lines through which hexadecimal number can be transmitted simultaneously. It saves time.
Sathish said:
1 decade ago
In parallel format,each input(one of the digital signals to be transmitted) has its own path or line to transmit through it. So no of inputs has its own and separate line (i.e) it has its own conductors.
Rudrasen pal said:
1 decade ago
Parallel :: reaching or getting of many signals at a same time.
So every signals should have its own path/conductor.
So every signals should have its own path/conductor.
Abhishek said:
1 decade ago
But why it is said conductor?
(2)
Upendar kadem said:
9 years ago
Parallel format: At a time we will send the number of bits by using the number of paths (channels). Eg: We saw running competition, in that each runner will have desired path to run and to reach the destination.
So same concept we assume in communication tech, each channel or path called conductor in wired communication we will send the data by using metal wires (conductor)s only.
So same concept we assume in communication tech, each channel or path called conductor in wired communication we will send the data by using metal wires (conductor)s only.
(1)
Ranbir said:
8 years ago
Wire connector from input to the output, ie wire considered as a conductor.
Post your comments here:
Quick links
Quantitative Aptitude
Verbal (English)
Reasoning
Programming
Interview
Placement Papers